Product Manual

Options
53
Start at
With the Start at function, you set the
e
xact time at which you want the pro‐
gram to start.
 Use the  arr
ow buttons to set the
hour and confirm with OK.
The hour will be saved and the minute
number block will
be highlighted.
 Use the  arr
ow buttons to set the
minutes and confirm with OK.
The display will switch to the program
menu.
 Close the door within four seconds.
The left TimeControl function will start
flashing.
When the set time is reached, the pro‐
gram selected will begin automatically.
Finish at
With the End at function, you set the
time at which you
wish the program to
end.
 Use the  arr
ow buttons to set the
hour and confirm with OK.
The hour will be saved and the minute
number block will
be highlighted.
 Use the  arr
ow buttons to set the
minutes and confirm with OK.
The display will revert to the program
menu an
d the estimated start time will
appear.
 Close the door within four seconds.
The left TimeControl function will start
flashing.
A message will appear in the display if
the pr
ogram cannot be completed by
the set finish time because it has too
long a running time.
The selected program will start auto‐
matical
ly when the estimated start time
is reached.