Technical data

Miele
●
9 Independence Way
●
Princeton, NJ 08540
●
609-419-9898
●
800-991-9380
●
Fax [phone]
●
www.dentaldisinfector.com
11
Technical Data
Control Unit
Control system supplied with five standard programs:
Disinfection Vario 93ºC/200ºF
Disinfection 93ºC/200ºF
Wash
Rinse
Drain
Cleaning Mechanism
Rotary: Three multi-jet spray arms
Direct Injection: Using optional O 177/1 Upper Basket
Drying
Flash heat drying using standard sump heating element
Water Softener
Built-in, with adjustable water hardness
Automatic reactivation
Detergent Dispensing
Machine is equipped with a standard powder door cup
An optional automatic dispensing module is available for dispensing of liquid detergents
Main Circulation Pump
Circulation: 106 gal/min (400 l/min)
Construction: ABS plastic impeller and housing
Cabinet and Chamber
Materials and Construction:
Exterior: White front panels standard, with optional stainless steel panel or custom panels available
Interior: Type 304 SS sides, back, and top
Type 316 SS bottom and door
Plumbing Connections
One or two water connections as follows:
Tap a. Cold water for wash cycles. 5’5” connection hose with 3/4” hose thread unions
Minimum flow rate of 2.5 gpm/10-147 psi (recommended 25-60 psi)
DI Source (use optional) b. 5’6” connection hose with 3/4” hose thread unions
Minimum flow rate of 2.5 gpm/10-147 psi (recommended 25-60 psi)
Drain Connections
Connection One 7/8” ID flexible drain hose, 4’7” long
Maximum drain height, 39.4”
Maximum drain length, 13’
Electrical Requirements
Single Phase 208 V, 60 Hz, 2 x 30 Amps
Three Phase 208 V, 60 Hz, 3 x 20 Amps (Available as an optional conversion)
Unit is equipped with a 5’11”, 10 AWG, 3 wire, unterminated power cord
Units are CSA approved (certificate 1319665)
Dimensions
Interior: 18.5”H x 20.5”W x 20.5”D
Exterior: 33.46”H x 23.54”W x 24.0”D (Height is 32.28” without lid)
Noise Level
< 60 dBa
Customizable Décor Panels
Main Panel: 442 mm H x 586 mm W, 1.2 mm thick
Toe Kick Service Panel: 117 mm H x 586 mm W, 1.2 mm thick
Stainless Steel and select Laminate Décor Panels available through Miele. Custom panels available with a 6-8
week delivery time.