Operating instructions

ManualsBrandsMiele ManualsPrint & ScanG 7881

Fault Possible cause Remedy

The programme is

cancelled and the

p / 6 indicator

flashes.

Before trying to rectify the

problem, you must:

–

Turn the programme

selector to f (the fault

code goes out).

–

Switch the machine off

with the I-0 switch.

Fault code: F..A:

There is a water drainage

fault.

–

Clean the filters in the

wash cabinet.

–

Clean the drain pump.

–

Clean the non-return

valve.

– Remove any kinks and

straighten the drain

hose.

Then:

– Switch the machine on.

– Drain the water.

– Start the programme

again.

Water in the wash

cabinet is not heated;

the programme lasts

too long.

Fault code: F01 - F03, F18,

F19

This machine has a

resettable heater limiter

which will switch off the

heating elements if they

over-heat. This could be

caused for example, by

large articles covering the

heating elements or if the

filters in the wash cabinet

are blocked.

To rectify the problem:

– Clean the filters in the

wash cabinet.

–

Rearrange the load.

–

Reset the thermal

cut-out (see "Other

problems, Thermal

cut-out").

Problem solving guide

53