Technical data

DI water connection
If required the machine can be
connected as standard to a DI water
supply of:
Acceptable water pressure
(flow rate): 10 - 147 psi
Recommended water pressure
(flow rate): 25 - 60 psi
^
The DI pressure-tested hose (marked
"H
2
O pur") with a
3
/
4
" (19 mm) GHT
female hose thread must be
connected onsite to the DI inlet for
purified water.
If the machine has a DI water
connection which is not going to be
used, the electronics will need to be
reprogrammed by a Miele
technician. The inlet hose will remain
at the rear of the machine.
Plumbing
66