Technical data

What if ... Possible fault Solution
Instruments show
corrosion.
There is too much chloride
in the water.
Have the water analyzed.
Probable need for external
water treatment and usage
of DI (deionized) water for
the final rinse.
The items show white
residues.
The water softener is
programmed too low.
Check the water hardness
and program the water
softener to the correct
value.
The salt container is
empty.
Refill the salt reservoir.
The salt reservoir cap was
not screwed on properly.
Reseat and screw the cap
on firmly.
The rinse aid dispense
amount is too low, water
stains show.
Increase the dispense
amount for rinse aid.
The instruments show
tooth cement residues.
Remove tooth cement
residues from the
instruments before it
hardens.
Frequently asked questions
56