Technical data

What if ... Possible fault Solution
The program was
canceled, the indicator
p/6 flashes.
Before fixing the fault:
–
Turn the program
selector to f, the fault
code goes out.
–
Turn the machine off
with the On/Off button.
Fault code F..A:
Drain fault
–
Clean the triple filter
system.
–
Clean the drain pump.
–
Clean the non-return
valve.
–
The drain hose is kinked
or the loop stands up
too high.
After the program has
finished
– Turn the machine on.
– Drain the water.
– Start the program again.
Water in the wash
cabinet is not heated;
the program sequence
takes too long.
Fault code F01 - F03, F18,
F19
This machine has a
resettable thermo switch
which shuts off the heating
elements in the event of
over-heating. Overheating
can be caused by large
articles covering the heating
elements or if the filters in
the wash cabinet are
blocked.
To fix the fault:
– Clean the triple filter
system.
–
Rearrange items.
–
Turn the thermo switch
on again. See
"Frequently asked
questions - Thermo
switch".
Frequently asked questions
54