Technical data

What if ... Possible fault Solution
The "Recharge"
indicator flashes.
The water softener has run
out of salt.
Refill the salt reservoir.
The indicator p/6
flashes a few minutes
after the program start,
the program was
canceled.
Before fixing the fault:
–
Turn the program
selector to f, the fault
code goes out.
–
Turn the machine off
with I-0.
Fault code F..E:
Water intake fault
–
The water supply may
be interrupted.
Check to see that the
water supply is turned
on and flowing.
– Clean the water inlet
filters.
– The water pressure is
too low. Contact the
Miele Service
Department.
After the program has
finished:
– Turn the machine on.
–
Restart the program.
Frequently asked questions
53