Technical data

The following guide can be used to help address minor problems without a
service call.
Repairs should only be performed by Miele Technical Service. Work performed
by unqualified persons can place the user at considerable risk of harm.
To help avoid unnecessary service calls, please be sure to check first whether an
error message is due to operator error.
To do this:
^
Turn the program selector to f, the fault code goes out.
^
Turn the machine off with the On/Off button.
^
Turn the machine on again and reselect the program.
^ In the event of any faults which cannot be remedied, please contact the Miele
Service Department.
^ Please have the fault code number "F..." ready when calling.
What if ... Possible fault Solution
The program does not
start.
The door is not properly
closed.
Close the door firmly.
The machine is not
plugged in.
Insert the plug.
The fuse has tripped. Reset the circuit breaker.
See data plate for
minimum fuse protection.
The washer is not turned
on.
Press the On/Off button
and select a program.
The machine is not
ready for use.
Fault code F04-F17, F
20-F--
Contact the Miele
Technical Service
Department.
Fault code F31-33 Dosing system faulty.
Contact Miele Technical
Service.
Frequently asked questions
50