Technical data

~
Take care when handling
processing chemicals (detergents,
softeners, neutralizers, etc.). These may
contain irritant or corrosive ingredients.
Wear protective gloves and goggles.
With all chemical agents the
manufacturer’s safety conditions must
be observed.
~
The washer is only designed to
operate with water and the
recommended processing chemicals.
The washer must NOT be operated with
organic solvents or flammable liquids.
This may cause an explosion or
damage to rubber and plastic
components, which in turn allows liquid
substances to leak out.
~
Do not stand, sit or lean on the
opened machine door. This could
cause the machine to tip over and
could cause injuries and damage.
~
Do not touch the heating elements
during or directly after the end of a
program, you could burn yourself. They
remain hot for some time after the end
of the program.
~
The water in the machine must not
be used as drinking water.
~
Be careful when sorting items with
sharp pointed ends. Position them in
the machine in a way that you will not
hurt yourself or create dangers for other
operators.
~
When using this machine regard the
high temperatures and be especially
careful not to scald or burn yourself.
When opening the door bypassing the
electrical lock, a danger of burning,
scalding or corrosion exists or the
possibility of inhaling toxic fumes. Let
baskets and inserts cool. Empty any
water from parts into the wash cabinet.
~
If toxic chemical substances can
form in the wash water during
processing the door seal and, if
applicable, the function of the steam
condensor must be checked regularly.
In that case, opening the washer door
during a program interruption can be
dangerous.
~
If you are exposed to toxic vapors or
processing chemicals, consult the
manufacturer's material safety data
sheets for emergency procedures.
~
After drying with the drying unit
open the door to allow the items and
inserts to cool.
~
Never clean the machine or near its
vicinity with a water or high pressure
hose.
~
Avoid inhaling powder products.
They can cause burning in the mouth
and throat if swallowed, and can inhibit
breathing.
~
Before servicing, disconnect the
power supply by either removing the
fuse, unplugging the unit or manually
"tripping" the circuit breaker.
IMPORTANT SAFETY INSTRUCTIONS
5