Technical data

Cleaning the water inlet filters
To protect the water inlet valve, filters
are incorporated in the intake hose
attached to the water faucet. If the
filters are soiled they must be cleaned
to ensure sufficient water intake to the
wash cabinet.
,
The plastic valve housing on the
intake hose contains electrical
components and should not be
immersed, or run through water.
Cleaning the filters
^
Disconnect the machine from the
main electrical supply.
^
Close the water supply and unscrew
the water inlet valve.
^
Carefully remove the rubber seal.
^
Take out the filters with needle nose
pliers.
^ Rinse the large area filter, 1, and fine
filter, 2, under running water, and
replace if necessary.
^
Return filters and seal. Make sure
they are seated correctly.
^
Screw the water inlet valve on to the
water faucet. checking that it is not
cross-threaded.
^
Open the water faucet.
^
Check for leaks.
Cleaning and Care
48