Technical data

Priming the neutralizer dispensing system
The dispensing system needs to be primed:
- when the dispensing concentration is set for the first time,
- if the neutralizer container runs out and is not filled in time.
Step Display / Result
^
Press "Drying" 0 until E02 appears
in the display.
E02
^
Turn the program selector to the
5-o'clock-position.
"d§3" appears in the display
^
Press the "Display" ß button.
The dispensing system will be
primed automatically. "0" will appear
in the display when priming is
finished.
^ Press the "Start" 6 button.
"SP" appears in the display.
^ Press "Start" 6 again.
The change has been recorded.
Every time the dispensing system has been primed:
^ Run the "Rinse" program to dilute and drain away any agents that may remain in
the wash cabinet.
Programming functions
40