Technical data

Note any adjustments of the factory settings in the provided field in case a

service call is necessary.

General notes

–

Non occupied program selector positions are displayed with a bar (-)inthe

middle of the display.

–

Turn the program selector to the f position to display the programming level,

shown as E.. in the display.

For all programming functions:

Activate the program mode

Step Display / Result

^ Turn the program selector to f.

^ Turn off the machine.

^ Press and hold the"Display" ß and

"Start" 6 buttons at the same time

press the "On/Off" button.

The display shows the current program

version P.. will appear in the display. The

"Fill/Drain" indicator lights.

Saving the values and ending the program mode

Press the "Start" 6 button.

The display shows SP.

Press the "Start" 6 button again.

The change has been saved.

Ending the program mode without saving

Turn the machine off with "On/Off".

The change was not saved.

Programming functions