Technical data

Turning on
^
Close the door.
^
Press the "On/Off" button.
If the program selector is in the f
position an indicator lights in the
display.
Starting a program
^ Turn the program selector clockwise
or counterclockwise to the desired
program.
The display shows the first wash
temperature of the selected program
(except in "Rinse" and "Drain"). The
"Start" indicator flashes.
Selecting the optional drying
function
The additional function "Drying" can be
selected immediately after a program
was selected (except "Rinse" and
"Drain").
^ Press the "Drying" 0 button.
Drying is phased over 10 minutes. The
total running time of the program
lengthens accordingly.
^ Press the "Start" f button.
The display shows the current
temperature.
The "Start" indicator lights.
All other programs are locked during
the program cycle. If the program
selector is turned to a different
program, the display goes out. The
values appear again if the program
selector is turned back to the running
program.
Use
31