Technical data

Water connection spring
adapter
The spring adapter for water
connection must engage correctly
when a basket or injector unit is
inserted in the machine. It must be
4-5 mm higher than the water
connection inlet in the machine.
If it is not, adjust the adapter
accordingly.
^
Loosen the lock ring, a.
^
Push up the adapter (4-5 mm higher
than the water connection inlet in the
machine), b.
^
Tighten the lock ring, c.
Height adjustable top basket
The upper basket can be adjusted
above and below the middle position
by 13/16" (2 cm).
Depending on the position of the upper
basket and usage of an insert, items of
the different heights can be
accommodated in the baskets.
To adjust the upper basket
^
Pull out the top basket, lift from the
runners and remove.
^
Unscrew the knurled nuts (roller
bearings) on both sides of the basket
with a suitable wrench reposition if
required.
Loading the machine
26