Technical data

Filling the salt reservoir
Only special, coarse-grained
reactivation salt should be used in this
machine, available from Miele's
Professional Department. Please see
back page for contact information.
Other salts may contain insoluble
additives which can impair the water
softener. These could contain
components which are insoluble in
water and could damage the water
softener. If in doubt consult Miele's
Professional Department.
The salt reservoir holds about 2.5 kg of
salt.
,
Inadvertently filling the salt
reservoir with detergent will
damage the water softener!
Make sure that only water softener
reactivation salt is used.
^
Remove the lower basket.
^
Unscrew the salt reservoir cap.
Before filling the salt reservoir with
reactivation salt for the first time, fill it
with approx. 2.5 liters of water.
Water does not have to be added
with subsequent refills.
^ Place the funnel provided in place.
^
Carefully fill the reservoir with the
reactivation salt.
Some displaced water will run out - this
is normal.
Water softener
16