Operating instructions

Connect the water drain
–
The drainage system is fitted with a
non-return valve which prevents
wastewater from flowing back into
the machine through the drain hose.
–
It is best to connect the appliance to
a separate drainage system on site.
The on site drain connection point
must be located between 0.3 m (1ft)
and 1 m (3ft) above the lower edge
of the appliance.
If it is lower than 0.3 m, lay the hose
in a curve at a height of at least
0.3 m.
The drainage system must be able to
handle a minimum drainage flow of
16 l/min.
– The drain hose is approx. 1.4 m long
and flexible (internal diameter
22 mm). It must not be shortened.
Use the supplied hose clamps to
secure it into position.
– Longer drain hoses (up to 4 m) can
be ordered through Miele.
–
The drainage system must not
exceed 4 m.
See the supplied installation diagram.
Plumbing
66