Operating Instructions Dishwasher G 2832 To prevent accidents and appliance damage read these instructions before installation or use. en - US, CA M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Caring for the environment . . . . . . .
Contents Additional options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Settings ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Drying Plus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS WARNING – When using your dishwasher, follow basic precautions, including the following: Read all instructions before installation or use of the dishwasher to prevent injury and machine damage. Use the dishwasher only for its intended purpose. This appliance is intended for residential use only. Keep these operating instructions in a safe place and pass them on to any future user.
IMPORTANT SAFETY INSTRUCTIONS Installation ~ The dishwasher must be installed and connected in compliance with the installation instructions. ~ Installation and repair work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. ~ , WARNING - Fire hazard Do not cover or crush the plug of the appliance. Ensure that the cabinet opening for the dishwasher provides ample space for the plug.
IMPORTANT SAFETY INSTRUCTIONS Use ~ To reduce the risk of injury, do not allow children to play in, on or near the dishwasher. ~ Only use detergents and rinse aids recommended for residential dishwashers. Keep all detergents and rinse aids out of the reach of children. Do not inhale or swallow detergents. ~ Only use the dishwasher if all panels ~ Dishwasher detergents contain irritant are properly in place. ~ Do not tamper with the controls.
IMPORTANT SAFETY INSTRUCTIONS ~ Advise the user of the AutoClose feature to avoid injuries by walking, bumping or knocking into the partially opened door. ~ Supervise children near the dishwasher to ensure fingers or other parts of the body are not caught when the AutoClose feature is in operation. Disposal of an appliance ~ If the appliance is removed from its installation site and will not be used, remove the doorlock to the wash cabinet to prevent children from locking themselves in the machine.
Guide to the dishwasher a Upper spray arm (not visible) g Triple filter system b Cutlery tray h Data plate c Upper basket i Child Safety Lock in the door handle (not visible) d Middle spray arm e Air inlet for drying (depending on model) f Lower spray arm 8 j Rinse aid reservoir k Dual compartment detergent dispenser l Salt container
Guide to the dishwasher Control panel a K (Information) touch control To display more info about the displayed menu b s (On/Off) touch control To turn the dishwasher on and off c Selection touch controls To select a menu point displayed next to the touch control. To change the displayed value (+/-). To browse between menus. d Display See the following pages for more information e Standby indicator The indicator flashes when the dishwasher is turned on but the display is turned off.
Guide to the dishwasher Display The following can be selected in the display : – the wash program – the options – the start time – the settings J menu – information During a running program the display shows : – the program name – the current time of day – the program sequence – the approximate remaining time – faults and messages To save energy, if a button is not pressed, the display will turn off after a few minutes. To show the display again, press any button.
Caring for the environment Energy saving washing This dishwasher is exceptionally economical in the use of water and electricity. For best results follow these tips: ^ For lowest energy consumption you may connect the dishwasher to a cold water source. ^ For fastest possible wash times, with slightly higher energy consumption, connect the dishwasher to a hot water source. ^ If the dishwasher is connected to hot water, select "Energy Saver" when washing light to normally soiled dishware.
Before using for the first time To open the door To close the door ^ Push the baskets in. ^ Lift the door and push until the catch engages. The door will then close automatically. ,Keep fingers and other body parts away from the door as it is closing. Danger of injury. Child Safety Lock The door will open automatically at the end of the program to aid in the drying process. This function can be deactivated (see "Settings - Drying Plus"). ^ Press the release catch inside the door grip.
Before using for the first time Welcome screen ^ Turn the dishwasher on s. The Welcome screen shows when the washer is turned on for the first time. Language setting The display changes automatically to the language setting. Sprache F ° #eština ° dansk ° deutsch B m OK ° ^ Select the desired language and confirm with OK. The selected language is marked with a L check. Clock format The display changes automatically to the clock format.
Before using for the first time Time of day setting The display changes automatically to the time of day setting. Time of day + ° 12:00 - ° OK ° ^ Set the hours using the +/- controls and confirm with OK. Set the minutes and confirm. Display The display changes automatically to the screen for setting the time of day display. Display ° On ° On for 60 Seconds B ° Do not display OK ° ^ Select the display desired for the time of day, confirm with OK.
Before using for the first time Water softener Every dishwasher is tested before leaving the factory. Any water remaining in the machine is from the final factory test and does not indicate that the machine has been used. To achieve good cleaning results, the dishwasher needs soft water. Hard water results in calcium deposits on dishware and in the dishwasher. If your tap water hardness is above 4 °d (4 gr/gal [US]), the water should be softened.
Before using for the first time Filling the salt container ,Inadvertently filling the salt container with dishwashing detergent will damage the water softener. ,Only use water softener salt specially formulated for dishwashers. Other salts may contain insoluble additives which can impair the water softener. ^ Remove the lower basket and unscrew the salt container lid. When opening the salt container, water will run out. Open the container only to refill salt.
Before using for the first time Rinse aid Rinse aid helps to prevent spotting on dishes and glassware. The rinse aid is filled in the reservoir and the set amount will be automatically dosed. ,Filling the rinse aid reservoir with detergent will damage the reservoir. Only pour rinse aid formulated for residential dishwashers into the reservoir. When using "Tab" detergents, a rinse aid is not needed.
Before using for the first time Rinse aid refill message When the Insufficient rinse aid message first comes on, there will be enough rinse aid left for 2 - 3 washes. ^ Refill rinse aid after the program has finished. If the "Tab" function is selected, the Insufficient rinse aid message will not come on. See "Settings J Detergent". ^ Confirm with OK. The Insufficient rinse aid message will clear from the display.
Loading the dishwasher ,Do not wash items soiled with ash, sand, wax, grease or paint in the dishwasher. Ash and sand do not dissolve and will be distributed throughout the inside of the dishwasher. Wax, grease and paint will cause permanent discoloration and damage to the dishwasher. ^ Scrape food from dishes before placing them in the dishwasher, rinsing is not necessary. ^ Some foods contain natural dyes, e.g. carrots or tomatoes.
Loading the dishwasher Items not recommended for dishwashing – Cutlery with wooden handles – Wooden cutting boards – Glued items such as old knives with handles glued together around the shank of the blade – Handmade craft items, antique, metal trimmed or decorative glassware Glassware: – There are no standard guidelines for washing glassware, when in doubt wash by hand. – When purchasing new dishes, glasses and cutlery, make sure they are dishwasher safe.
Loading the dishwasher Split cutlery tray ^ Arrange the cutlery as shown in the cutlery tray. Spoons with thick handles may have to be placed as knives and forks with their heads in the holders. For easier unloading cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc. Place knives with the cutting edge and forks with the prongs between the holders. Spoons should be placed in the opposite direction with the handles between the holders.
Loading the dishwasher Upper basket ,Always use the dishwasher with the upper and lower basket inserted. (except during the Tall items program). Removable spike insert The spike insert can be removed to create more space for larger items, e.g. a saucepan. Removing the insert a: ^ Load the upper basket with small, lightweight, or delicate items such as cups, saucers, glasses, dessert bowls and flat pans.
Loading the dishwasher Adjustable cup racks Coffee bar ^ Raise the rack to make room for tall glasses. Lower it to double stack smaller pieces. (depending on model) Glasses can be leaned against the coffee bar to allow a firm stand. The height of the cup rack can be adjusted in two levels. ^ The bar can also be used to separate two rows of glasses. ^ Pull the cup rack upwards and let it engage at the desired height. ^ To stack wide items, flip the bar to the right.
Loading the dishwasher Universal support bar The support bar will hold tall glasses and stem-ware securely. ^ Fold the bar down and lean the desired glasses against it. ^ If desired, a section of the cutlery tray can be removed to allow for even taller glasses.
Loading the dishwasher Adjusting the upper basket The upper basket can be raised or lowered to accommodate tall items. The basket can also be angled to fit tall items in both, the upper and lower baskets. The angles should not be set to opposite extremes. This will block the middle spray arm. Take care when sliding the basket in and out in this position. Depending on the setting of the upper basket, a variety of plate dimensions can be accommodated.
Loading the dishwasher Lower basket Foldable spikes The foldable spikes can be used for small plates and saucers. ^ For larger and heavier items such as plates, serving platters, saucepans, bowls, etc. Small plates and saucers can also be arranged in the lower basket. Two rows of spikes can be folded down, to create more room for larger dishware, e.g. pots, pans and bowls. ^ Press the yellow lever down a and fold down the spikes b.
Loading the dishwasher Removable spike insert The spike insert can be removed in order to make room for larger tableware or to use a different insert. Removable PlateGuard Plus with StemGuard (depending on model) This insert is ideal for cups, glasses, plates, bowls, pots and pans. Removing the insert a ^ To remove the insert, gently pull the handle upwards. ^ To arrange tall items the cup rack can be raised.
Loading the dishwasher Vase / Bottle insert (depending on model) The vase / bottle insert can be used to rinse narrow items, e.g. vases, baby bottles, etc. Removing the insert a: ^ To remove the insert, gently pull the handle upwards. Inserting the insert b: ^ Place the insert into the lower basket. ^ Slide the hitches of the insert under the struts of the lower basket. ^ Push down on the handle to snap the insert into position. 28 ^ Place the insert into the lower basket as shown in the illustration.
Basket accessories Additional inserts for the upper and lower baskets may be purchased from your Miele dealer or Miele. Depending on the model some accessories come standard with the machine.
Use Detergent ,Dishwasher detergents contain irritant and corrosive ingredients. Avoid inhaling or swallowing dishwasher detergent. Keep children away from detergent. Fill the detergent dispenser only when you are ready to start the dishwasher. ,Only use detergents formulated for domestic dishwashers. Use only the recommended amount of detergent. Continued use of too much detergent may cause machine damage.
Use Adding detergent ^ Add detergent to compartment II and close the flap. ^ If a Pre-rinse is desired, and available for your chosen program, add 1 teaspoon (5 ml) of detergent to compartment I. ^ To open, press the latch on the detergent dispenser. The flap will spring open. The flap is always open at the end of a program. The horizontal marks in compartment II indicate the levels of approximately 1 ¼ and 2 tablespoons (20 and 30 ml) respectively. Compartment I holds a maximum of 2 teaspoons (10 ml).
Use Turning on ^ Make sure the spray arms can rotate freely. ^ Close the door. ^ Open the water supply, if closed. ^ Turn the dishwasher on by touching the s control. The main menu shows in the display. If the memory function is selected, the last selected program is displayed. See "Settings J - Memory". Main menu 12:00 ° Normal ° Pots & Pans ° China & Crystal m : Selecting a program Choose a program according to the type of load and soiling.
Program guide Program When to use Program sequence Pre rinse Normal For normally soiled dishware with dried on food Pots & Pans For normally soiled pots & pans with dried on food, and heavily soiled dishware, use 120% detergent recommended Main wash 1 2 x x x Interim rinse 1 China & Crystal as For temperature sensitive required glassware and lightly soiled dishware, use 50% detergent recommended; sensor controlled GlassCare program x Express "Quick program" for lightly soiled dishware, e.g.
Program guide Program When to use Program sequence Pre-rinse 1 2 Main wash Interim rinse 1 2 Final rinse Drying x x x x x x x x x x x x x Starch/Cheese For dishware with dried on starchy or cheesy food; 120% detergent recommended x x x x x LG items soiled x x x x x Glassware - no To wash glassware rinse aid warm without detergent and rinse aid; rinse cycle with warm water x x x Glassware - no For a quick cleaning of rinse aid cold glassware for direct reuse; use without
Use ^ Select the desired options. The detergent type can now be set. You can choose between normal powder, gel or Tabs. See "Settings J - Detergent". Selecting options Options can be added to the selected program. ^ Select the Options menu. The display shows the available options for the selected program. The selected options are marked with a L check. ^ To de-select an option press the respective touch control again. ^ Confirm the selected options with OK. The display changes back to the program menu.
Use Starting a program Time display ^ Select Start. Before the program starts, the time display shows the running time of the selected program in hours and minutes. During the running program the remaining time is shown in the time display. The program starts and Dishes can be added appears in the display. As long as this reference is shown, tableware can be added to the machine without impairing the cleaning result. Cancel a program only in the first few minutes. Otherwise important program steps (e.g.
Use At the end of a program At the end of a program the display shows Program finished or Drying plus with the door slightly open (if activated). ,The steam being released at the end of the program may be hot. Use caution. Dishes tend to chip if removed still hot from the dishwasher. If the automatic door opening setting is deactivated (see "Settings - Drying plus") it is recommended to open the door manually to allow tableware to cool much faster. ^ Unload the dishwasher.
Use Changing a program If the detergent flap is already open, do not change the program. If a program has already started and you wish to change it: 12:00 Sensor Wash Pre-rinse Time left 1:30 h Cancel ° ^ Select Cancel. ^ Confirm the message Cancel program? with OK. The program is canceled. Sensor Wash 12:00 Program finished Main menu ° ^ Select Main menu. The display changes to the main menu. ^ Select and start the desired program.
Additional options Delay start The starting time of a program can be delayed between 15 minutes and 24 hours. The start can be delayed in 15-minute-increments. When using the "Delay Start" function make sure that the detergent compartment is dry before adding detergent, use a cloth if necessary. The detergent might stick together and not get completely rinsed out. Do not use liquid detergent when selecting "Delay Start", the detergent could leak out of the compartment.
Additional options 12:00 Sensor Wash Start at 12:00 Cancel ° The program name and start time are displayed. The program starts automatically at the selected time. Starting a program before the delay start has elapsed: A program can be started before the delay start time has elapsed. ^ Select Cancel and confirm with OK. ^ Select Main menu. The display changes to the main menu. ^ A program can now be selected and started.
Settings ! The "Settings J" menu allows you to adjust standard settings Open the Settings J menu ^ Turn the dishwasher on s. The main menu shows in the display. If the memory function is selected, the last selected program is displayed. See "Settings J - Memory". In this case, switch to the main menu by touching "Clear". Main menu 12:00 ° Settings F ° Normal ° Pots & Pans m ^ Select Settings J. The display changes into the "Settings J" menu.
Settings ! Language J Time of day The display contents can be shown in different languages. This selection allows the clock to be shown as 24 or 12 hours and to set the clock. The displayed language can be changed by the submenu "Language J". ^ Select the desired language and confirm with OK. The flag behind the word "Language J" serves as a guide when an unfamiliar language is selected. Select the respective menu with a flag until the submenu Language J appears.
Settings ! Detergent Tab To achieve best results the used detergent can be set on your dishwasher. The selections available are "Powder", "Gel" and "Tab". The program cycle sequence will be adjusted for the selected detergent. Depending on the program the program running time could increase. If the "Tab" indicator is lit than the program sequence is adapted to suit detergents than contain rinse aid and salt (as well as other components where applicable).
Settings ! Drying Plus The Drying plus function automatically opens the door slightly at the end of a program, in order to improve the drying process. This function can also be deactivated. ^ Select the desired setting and confirm with OK. Water hardness The water hardness level set can be viewed under the submenu "Water hardness". ^ Press "OK" to return to the "Settings J" menu. To reset the water hardness see "External water softener".
Settings ! Rinse aid Filter check For best results the rinse aid dosage can be adjusted. The dosage can be set between 0 and 6 ml. This selection allows you to set the number of cycles run before the filter check message shows. You can select between 30 and 60 cycles. The dosage set by default to 3 ml of rinse aid per program. – Use a higher setting if spots appear on dry glassware. – Use a lower setting if streaking appears on dishes or glasses.
Settings ! Reorganize program list The order of the programs in the program list can be reorganized. Frequently used programs can be saved to the first three positions. Select program for position 1 12:00 ° Normal B m ° Pots & Pans ° Cancel Continue ° ^ Select the program to be saved to the first program list position. ^ Confirm with Continue. ^ Repeat for the program to be saved to the second and third program list position. ^ Confirm each selection with Continue. The selected programs are now shown.
Settings ! Save options Additional options can be selected for some programs, e.g. extended drying. See "Use - Selecting options". Save options allows you to save the selected options for future use of the program. This function is turned off by default. ^ Select the desired setting and confirm with OK.
Settings ! Child Safety Lock The Child Safety Lock protects the dishwasher from misuse. If the dishwasher is turned on while the Child Safety Lock is activated, the display shows The appliance is locked. The lock must be deactivated before the dishwasher can be used. As long as the Child Safety Lock is activated, the dishwasher is locked every time it is turned on. The function is turned off by default. ^ Select On and confirm with OK. Unlocking the dishwasher ^ Turn the dishwasher on "K".
Settings ! Temperature Buzzer volume The temperature can be displayed in "°C/Celsius" or "°F/Fahrenheit". Two buzzer volumes can be selected or the buzzer can be turned off. The temperatures are shown in °C/Celsius by default. Off ^ Select the desired temperature unit and confirm with OK. The buzzer tone at the end of a program is turned off. Soft Buzzer The tone sounds in a soft volume. When the buzzer is activated, a tone sounds at the end of a program and if a fault occurs.
Settings ! Button tone RemoteVision A tone will sound when a button is pressed. (Optional accessory. To learn more about RemoteVision visit www.miele.com.) The volume can be set to 17 different levels. It is set to level 8 by default. ^ Select the desired setting and confirm with OK. Brightness The display brightness can be adjusted in 17 levels. The brightness is set to level 9 by default. ^ Select the desired brightness and confirm with OK. Contrast The display contrast can be adjusted in 17 levels.
Settings ! Dealer = Demo modes are only for showrooms. The dishwasher has three demo programs for showrooms. The programs "Demo mode" and "Endless demo mode" show the use and function range of the dishwasher. – Demo mode: The program is started by pressing any button. It runs once and must be started again. – Endless demo mode: The program starts as soon as it is activated and runs in a loop until it is turned off. – Demo wash sound: The program activates the pumps to demonstrate the wash sound.
RemoteVision Miele's RemoteVision Wi-Fi technology creates a 'virtual link' between your appliance and our monitoring center. If a fault occurs, Miele's client service center will be notified and contact you, or another trusted individual identified on your call roster, in order to gain access to your appliance to fix the problem. For information on set-up and installation of the RemoteVision module, see the separate RemoteVision installation manual.
Frequently asked questions With the aid of the following guide, minor problems can be fixed without a service call. ,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage. Technical faults Issue After the dishwasher was turned on the display stays off and the stand by indicator does not flash. The dishwasher stops during a program.
Frequently asked questions Problem Possible fault Solution Automatic door closing fault The door may be blocked. – Remove the item, if necessary restart the program. – If the message shows again contact Miele Technical Service. Automatic door opening fault Possible technical fault. – Open the door by hand and restart the program. – If the message shows again contact Miele Technical Service. The buzzer sounds.
Frequently asked questions Problems water intake/drain Issue The buzzer sounds. The display shows the following: Possible fault Solution No water intake Open the water faucet The water supply is closed. Open the water supply all the way. Fault water intake FXX Before fixing the fault: – Turn the dishwasher off by touching the s control. Fault F12/F13: Fault in the water intake. – Open the water supply all the way and restart the program.
Frequently asked questions Issue Possible fault The program "Energy The intake water does not Saver" displays the have a minimum fault: temperature of 115°F Water intake temp. too (45°C). See "Plumbing low Connection to the water supply". The buzzer sounds. The display shows the following: Fault in the water drain. Drain fault FXX There might be water in the wash cabinet. 56 Solution – Restart the program. – If the fault is displayed again, use a different program.
Frequently asked questions General problems with the dishwasher Issue The display turns off. Possible fault The display has gone into "Standby" mode to save energy. Solution Touch any control. The display turns on again. The display shows the following: The middle or lower spray arm is blocked by dishware. Open the dishwasher door and rearrange the items blocking the spray arms.
Frequently asked questions Issue Possible fault Solution Detergent is left in the dispenser at the end of a program. The detergent lid cannot be closed properly. The door and the interior walls are still wet after a program has finished. Water remains in the wash cabinet at the end of a program. The dispenser was damp when detergent was added. Detergent residue is blocking the catch. This is not a fault. It is the normal operating mode of the drying system. Dry the dispenser before adding detergent.
Frequently asked questions Sounds Issue There is a knocking noise in the wash cabinet. There is a rattling noise in the wash cabinet. There is a knocking noise in the water pipes. Possible fault Solution The spray arm is hitting an Interrupt the program, item in the basket. rearrange items blocking the spray arms. Items are not secure in the Interrupt the program and wash cabinet. rearrange loose pieces. This may be caused by the installation or the diameter of the pipe.
Frequently asked questions Poor cleaning results Issue The dishes are not clean. Possible fault The dishes were not loaded correctly. The program was not powerful enough. Stubborn but normal soiling (e.g. coffee, tea). Solution See "Loading the dishwasher". Select a more intensive program, see "Program Guide". Use the function "Adjust Sensor Wash". See "Settings J - Adjust Sensor Wash". Not enough detergent was Use more detergent, see dispensed. "Adding detergent". The spray arms are blocked.
Frequently asked questions Issue Possible fault Solution Dishes are not dry, The rinse aid setting may be Increase the dosage, refill glasses and cutlery too low, or the rinse aid the reservoir or switch the are spotted. reservoir is empty. rinse aid product when refilling, see "Before using for the first time". Leave dishes in longer, see Dishes were taken out too soon. "Use". Set the Detergent setting for A "Tab" product was used. These products have a low a normal (powder or gel) drying effect.
Frequently asked questions Issue Possible fault Glasses are Detergent deposits. discolored and the film cannot be wiped off. Clouding or etching Possible causes may be : on glasses. excessive rinse aid, incorrect water hardness level set, type and amount of detergent,. Any one or a combination of these faults may be to blame. Glasses are dull and discolored, film cannot be wiped off. Tea or lipstick stains have not been completely removed. Use a different detergent.
Comparison Tests 10 place settings, Standard program: Normal Upper basket Lower basket Cutlery tray 63
Comparison Tests 16 place settings, Standard program: Normal Upper basket Cutlery tray 64 Lower basket
After sales service Repairs MieleCare In the event of a fault which you cannot correct yourself please contact the Miele Service Department at the phone number on the back of this booklet. (USA only) ^ Please quote the model type and number of your appliance. These can be found on the data plate along the right edge of the door. PC Update The Program Correction (PC) allows a technician to update the dishwasher to make use of new technology.
Transport To transport the dishwasher, e.g. when moving to a new home, note the following: – Empty the dishwasher. – Secure any loose parts, e.g. hoses, cables, cutlery baskets. – Transport the dishwasher in the upright position. If unavoidable it may be transported on its back. Do not transport it on its side or on the door. Residual water in the machine could leak and cause electrical damage.
User Maintenance Instructions To prevent accidents and appliance damage, read these instructions before installation or use.
Cleaning and Care Exterior Check and clean your dishwasher regularly. This will help avoid problems and faults. ,Abrasive cleaning agents, all-purpose cleaners, thinner or ammonia based cleaners should not be used on the dishwasher. They will damage the surface. Wash cabinet Generally, the wash cabinet is self cleaning if the correct amount of detergent is used. ^ Only use a conditioner suitable for your kitchen cabinetry. ^ Clean wood only with a damp cloth and wipe dry.
Cleaning and Care Triple filter system Cleaning the triple filter The triple filter system in the base of the wash cabinet prevents food from being redeposited on dishes. It also protects the circulation pump from damage caused by foreign objects (e.g. broken glass, bones, etc.). During normal use, the filter system is self-cleaning. ,The machine must not be used without all the filters in place! ^ Check and clean the filter system periodically for any trapped or foreign objects.
Cleaning and Care To clean the underside of the filter the flap must be opened. ^ Return the filter so it lies flat in the base of the wash cabinet. ^ Push the clips together a and open the flap b. ^ Lock the filter by turning the handle clockwise. ^ Rinse under running water. ^ Close the flap so that the clip engages. 70 ,The triple filter system must be inserted and locked. Large particles could get in the circulation system and cause blockage.
Cleaning and Care Cleaning the spray arms Sometimes particles of food get stuck in the spray arm jets. The spray arms should be inspected and cleaned every 4 - 6 months. ^ Turn off the dishwasher before cleaning. Removing the spray arms ^ Remove the cutlery tray (if present). ^ Push the upper spray arm up to engage the inner ratchet and unscrew the spray arm. ^ Lift up the middle spray arm, a, to engage the ratchet and unscrew the spray arm, b. ^ Remove the lower basket.
Cleaning and Care Cleaning the water inlet filter A filter is incorporated into the intake hose attached to the dishwasher’s shut off valve. If your water is hard or the pipes contain sediment, this filter may clog and prevent enough water from entering the wash cabinet. ,The plastic housing of the water connection contains electrical wiring. Do not cut the intake hose or submerge it in liquid.
Cleaning and Care Cleaning the drain pump and non-return valve If the dishwasher is not completely drained at the end of a program, the drain pump or non-return valve may be blocked. ^ Turn off the dishwasher and pull the plug. ^ Remove the triple filter (see "Triple filter system"). ^ Use a cup or bowl to scoop water out of the wash cabinet. The drain pump is beneath the non-return valve (see arrow). ^ Remove all foreign objects from the drain pump (glass or bone splinters).
Installation Instructions Please refer to the Installation Diagram supplied with these instructions. To comply with IEC sound testing protocols, please contact Miele for additional instructions. Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information.
Electrical connection ,Installation, repairs and other work by unqualified persons could be dangerous. Check that the voltage, frequency and fuse rating shown on the data plate match the household mains supply. The power outlet must be accessible after installation. Do not use an extension cord to connect the dishwasher to the mains. Danger of overheating! See data plate on the right side of the door. A damaged power cord must only be replaced with a genuine Miele cord by a Miele service technician.
Plumbing Waterproof system All Miele dishwashers have a safety valve located on the incoming water line and a sealed underside with a water sensor. If a fault occurs, the water intake is stopped and the drain pump is activated. Connection to the water supply ,Do not drink water from the dishwasher! – The dishwasher can heat its own water to the temperature required by the wash program. This allows for connection of the machine to either a hot or cold water source.
Plumbing Drainage Venting the drainage system – The machine comes equipped with a built-in non-return valve on the discharge side to prevent waste water from flowing back into the dishwasher. If the dishwasher drain hose is connected to a floor drain or to a drain pipe that is less than 8" (20 cm) above the floor, the drain must be vented. Otherwise the water inside the dishwasher may siphon out during the wash program. – The dishwasher is equipped with a 5 ft (1.
Alteration rights reserved / 1911 G 2832 M.-Nr. 07 724 120 / 02 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
