Operation Manual

Before using for the first time
Important:
To ensure the correct functioning of
the appliance, let it stand for 1½ to 2
hours after transporting it to its final
location before connecting it to the
mains.
Cleaning
^
Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
Switching on
^ Press the On/Off button.
The temperature display and the alarm
indicator light will flash until the freezer
has cooled down to the correct
temperature for freezing.
To enable the temperature to get
sufficiently cold inside the
appliance, allow it to run for a few
hours before placing food in it.
Do not place food in the appliance
until the temperature is at least
-18°C.
Cool packs
Insert the cool packs into the slots in
the roof of the freezer cabinet. To do
this:
^
Remove the top freezer drawer.
^ Push the cool pack in at the back
and then press it upwards at the front
until it clicks into position.
The cool packs will be at their most
effective after they have been in the
freezer for approx. 24 hours.
Switching off
^ Press the On/Off button until the
temperature display goes out.
All the displays will go out and the
cooling system will switch off.
Switching on and off
12