Operating instruction dishwashers
Table Of Contents
- Contents
- Guide to the appliance 4
- Warning and Safety instructions 6
- Caring for the environment 10
- Before using for the first time 12
- Loading the dishwasher 22
- Operating the dishwasher 28
- Cleaning and care 36
- Problem solving guide 41
- Solving problems 49
- After sales service 52
- Optional accessories 53
- Comparison tests 54
- Programme chart 56
- Transport 58
Problem Possible cause Remedy
The dishwasher stops
running shortly after
starting a programme,
the in operation control
light is flashing rapidly.
Before rectifying the prob
-
lem you must:
Switch the dishwasher off.
Water inlet fault.
The indicator light "In
-
let/Drain", seen when the
door is open, lights up
and flashes alternately.
–
Open the stopcock
fully.
–
Check the water inlet
filter and clean if nec
-
essary, see “Cleaning
the water inlet filter”.
The Waterproof system
has reacted.
–
Call the Miele Service
Department.
The in operation control
light does not come on
after starting a
programme.
The reflector panel was
not correctly fitted.
Re-fit the reflector panel.
See relevant section in the
Installation Booklet.
Problem solving guide
42