Operating instruction dishwashers
Table Of Contents
- Contents
- Guide to the appliance 4
- Warning and Safety instructions 6
- Caring for the environment 10
- Before using for the first time 12
- Loading the dishwasher 22
- Operating the dishwasher 28
- Cleaning and care 36
- Problem solving guide 41
- Solving problems 49
- After sales service 52
- Optional accessories 53
- Comparison tests 54
- Programme chart 56
- Transport 58
Salt indicator
The salt indicator light in the control
panel comes on to notify you that the
reservoir is empty.
^ The reservoir should then be refilled
with dishwasher salt for reactivation.
(See: Filling the salt reservoir).
After the reservoir has been filled, the
water softener is automatically reacti-
vated the next time the dishwasher is
run. The salt indicator light may still be
illuminated during this process. It will
go out once the salt concentration has
reached the correct level.
Note
If the water in your area is very soft and
constantly lower than 0.7 mmol (4 °d)
you do not need to add salt to the res
-
ervoir. The salt indicator light, however,
will still come on, but should be ig
-
nored.
(See "After sales service" for definition
of "PC").
Before using for the first time
18