Installation and Operation
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 5
- Guide to the coffee system 10
- Controls and display elements 12
- Accessories 13
- First steps to use 14
- Operation 17
- Filling the water tank 18
- Filling the coffee bean container 19
- Turning the coffee machine on and off 20
- Adjusting the coffee dispensers to the cup height 21
- Preparing beverages 22
- Preparing espresso, coffee or lungo (large) coffee 22
- Preparing double portions 22
- Cancel preparation 23
- Preparing multiple cups of coffee, one directly after another (coffee pot) 23
- Preparing coffee beverages from ground coffee 23
- Beverages with milk 25
- Preparing hot water 26
- Preparing beverages from a profile 26
- After use 26
- Customizing your coffee 27
- Setting the serving size 30
- Settings 36
- Accessing the "Settings" menu 36
- Change and save settings 36
- Overview of possible settings 37
- Language 39
- Time of day 39
- Date 39
- Timer 39
- Eco mode 41
- Lighting 41
- Info (displaying information) 42
- Locking the coffee system ( System lock 0 ) 42
- Water hardness 42
- Display brightness 42
- Volume 42
- Activating and deactivating the plumbed water connection 42
- Factory default settings 43
- Showroom program ( demo mode ) 43
- Descaling 58
- Frequently asked questions 60
- Cleaning clogged milk pipework 69
- After sales service 72
- Installation instructions 73
- Caring for the environment 74
- Plumbing 75
- Lead free certificate 77
- Electrical connection 78
- Installation 79
- Adresses 87
^
Fill the water tank to the mark with
lukewarm water.
^
Add two descaling tablets to the
water.
Please note the mixing ratio for the
descaling tablets. It is important that
you fill the water container with
enough water. Too little water can
cause the descaling program to be
stopped prematurely.
^ Reinsert the water tank and close the
unit door.
^
Follow the instructions on the display.
When the display shows "Rinse water
container and fill with fresh tap water up
to the descaling symbol F ", proceed
as follows:
^
Rinse the water tank carefully with
clean water. Make sure that no
descaling agent is left in the water
tank. Fill clean tap water up to the
mark F.
Also empty the waste unit.
The descaling process is complete
when the display reads, "Program
finished".
^
Tap the OK button.
The descaling program is now
complete and beverages can be
prepared in the machine again.
When descaling the machine, be
sure to wipe off any splashes of
descaling agent immediately! These
could damage the surfaces.
After descaling the machine, carefully
clean the water tank and the drip tray to
remove all traces of descaling agent.
How to descale before
prompted
^ Tap x .
^ Tap the arrow key Y until
"Maintenance" is highlighted.
Tap the OK button.
^ Tap the arrow keys until "Descale the
system" is highlighted.
The descaling program cannot be
canceled once it has started. The
program has to be carried through to
the end.
^
Tap the OK button.
The descaling process will start.
Descaling
59