Installation and Operation
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 5
- Guide to the coffee system 10
- Controls and display elements 12
- Accessories 13
- First steps to use 14
- Operation 17
- Filling the water tank 18
- Filling the coffee bean container 19
- Turning the coffee machine on and off 20
- Adjusting the coffee dispensers to the cup height 21
- Preparing beverages 22
- Preparing espresso, coffee or lungo (large) coffee 22
- Preparing double portions 22
- Cancel preparation 23
- Preparing multiple cups of coffee, one directly after another (coffee pot) 23
- Preparing coffee beverages from ground coffee 23
- Beverages with milk 25
- Preparing hot water 26
- Preparing beverages from a profile 26
- After use 26
- Customizing your coffee 27
- Setting the serving size 30
- Settings 36
- Accessing the "Settings" menu 36
- Change and save settings 36
- Overview of possible settings 37
- Language 39
- Time of day 39
- Date 39
- Timer 39
- Eco mode 41
- Lighting 41
- Info (displaying information) 42
- Locking the coffee system ( System lock 0 ) 42
- Water hardness 42
- Display brightness 42
- Volume 42
- Activating and deactivating the plumbed water connection 42
- Factory default settings 43
- Showroom program ( demo mode ) 43
- Descaling 58
- Frequently asked questions 60
- Cleaning clogged milk pipework 69
- After sales service 72
- Installation instructions 73
- Caring for the environment 74
- Plumbing 75
- Lead free certificate 77
- Electrical connection 78
- Installation 79
- Adresses 87
Drip tray
Clean the drip tray daily to prevent
odors and mold.
The coffee machine will show a
message on the display when the drip
tray is full and needs to be emptied. At
this point at the latest, the drip tray
must be emptied.
Danger of burns!
If the coffee machine has just been
rinsed, wait a while before removing
the drip tray. Rinse water will run out
of the coffee dispensers.
^
Open the appliance door and
carefully remove the drip tray from
the appliance.
The grid in the drip tray helps keep
the water in place while you move the
full drip tray.
^
Wash the drip tray and the grid in the
dishwasher, or by hand with warm
water and liquid dish soap, then dry.
Make sure that the metal discs
(contacts) on the drip tray are
cleaned and dried properly. The
discs will only be able to detect that
the drip tray is full if they are clean
and dry.
^
Clean the space under the drip tray.
^
Push the drip tray back into the
coffee machine.
Make sure the drip tray has been
pushed into its niche as far as it will
go.
Cleaning and care
52