Installation and Operation

Cleaning the milk pipework using the
milk line cleaner
Make sure that the milk lines are
cleaned regularly and thoroughly.
Milk contains natural bacteria that
will grow when the lines are not
sufficiently cleaned. Contamination
in the unit can be a health risk.
The milk pipework must be cleaned
about once a week. The coffee
machine will remind you at the correct
time. Three days before, the display will
show the message "Days until milk
pipework cleaning: XX". The remaining
number of days until the milk pipework
needs to be cleaned will show in the
display every time the unit is turned on.
^ Tap the OK button to confirm this
message.
When the number of days left equals 0,
the display will show the message
"Clean milk pipework". At this time, the
function for preparing beverages with
milk is blocked.
^
Tap the OK button.
You can only prepare espresso, coffee,
lungo coffee and hot water. You can
only prepare beverages with milk again
once the milk pipework has been
cleaned.
The cleaning program cannot be
canceled once is has started. The
program has to be carried through to
the end.
To clean the milk pipework:
^
Tap x .
^
Tap the arrow key Y until
"Maintenance" is highlighted.
Tap the OK button.
^
Tap the arrow keys until "Clean milk
pipework" is highlighted. Tap the OK
button.
The process is started and various
messages will appear on the display.
^
Follow the instructions.
When the display shows "Fill water tank
with cleaning agent and lukewarm
water up to the cleaning mark 8 and
insert", proceed as follows:
Preparing the cleaning solution
The milk system detergent was
developed specifically for this coffee
machine. It is available from Miele.
To avoid damage to the unit, use
only this detergent.
^
Add one sachet of milk system
detergent to the water tank.
Cleaning and care
47