Operating and Installation instructions

Water connection
183
Connection to the drainage
system
 WARNING - Read all instructions
before installation or use of the
steam oven to prevent injury and ma-
chine damage.
The drainage trap must not be lo-
cated higher than the drain hose
connection point on the appliance.
This is to ensure that water can drain
out completely after a program.
The top end of the drain hose must
not be higher than
1911/16" (500mm) where it con-
nects to the siphon.
The plastic drain hose supplied must
not be shortened.
The drain can be connected to either
– a surface mounted or flush-mounted
siphon with a fixed hose connection
or
– to the appliance's rinsing siphon con-
nection.
The temperature of the drainage water
is approx.160°F / 70°C.
Only genuine original Miele hoses can
be used with this appliance.
Connecting the drain hose
 Connect the plastic hose to the
siphon using the hose sleeve Ø
3/4" (21mm).
 Then secure the hose with the hose
clamp.