Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Overview
- Control panel
- Description of functions
- Before using for the first time
- Modes / Programs / Menus
- Operation: Steam cooking
- Operation: Combination cooking mode
- Operation: Functions without steam
- Quick guide
- Interrupting operation
- Additional functions
- Setting additional durations
- Turning off automatically
- Turning on and off automatically
- Sequence of an automatic cooking process
- Rapid PreHeat
- Switching off Rapid PreHeat
- Changing the operating mode
- Changing settings during a cooking process
- Changing the temperature
- Changing the core temperature
- Changing the broil level
- Changing the cooking duration
- Deleting a cooking duration
- Deleting a finish time
- Canceling cooking
- MyMiele
- MasterChef
- Favorites
- Alarm + Timer
- General notes
- Steam cooking
- Sous-vide (vacuum) cooking
- Special modes
- Roast probe
- Roast
- Bake
- Broil
- Settings
- Cleaning and care
- Frequently asked questions
- Optional accessories
- IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION
- Detailed dimensions of oven front
- Installation dimensions
- Installation
- Electrical connection
- Caring for the environment
- Technical service, data plate, warranty
- MieleCare
- Copyright and licenses
Settings
145
Sensor lock
The sensor lock prevents a cooking
process from being switched off or
changed while it is running. Once acti-
vated, the sensors are locked a few
seconds after a program has started.
– On
The sensor lock is active. Press the
symbol for at least 6seconds to
use the sensors again. The sensor
lock is then deactivated for a short
period.
– Off
The sensor lock is deactivated. All
sensors react to touch as normal.
Water hardness
The steam oven is factory set for Hard
water. It must be adjusted local water
hardness to ensure trouble-free opera-
tion and to ensure that descaling is car-
ried out at the correct interval. The
harder the water, the more often it will
need to be descaled.
– Soft
<8.7°gr/gal, <1.5mmol/l
– Medium
8.7-14.6°gr/gal, 1.5-2.5mmol/l
– Hard
>14.6°gr/gal, >2.5mmol/l
Showroom program
This mode enables the oven to be
demonstrated in showrooms without
heating up. It should not be set for do-
mestic use.
Demo mode
If demo mode is activated Demo Mode
active. The appliance will not heat up will
appear when the steam oven is turned
on.
– On
Press OK for at least 4 seconds to
activate demo mode.
– Off
Press OK for at least 4seconds to
deactivate demo mode. The steam
oven can then be used as normal.