Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Overview
- Control panel
- Description of functions
- Initial commissioning
- Modes / Programs / Menus
- Operation: Steam cooking
- Operation: Combination cooking mode
- Operation: Functions without steam
- Quick guide
- Interrupting operation
- Additional functions
- Setting additional durations
- Turning off automatically
- Turning on and off automatically
- Sequence of an automatic cooking process
- Rapid PreHeat
- Switching off Rapid PreHeat
- Changing the operating mode
- Changing settings during a cooking process
- Changing the temperature
- Changing the core temperature
- Changing the broil level
- Changing the cooking duration
- Deleting a cooking duration
- Deleting a finish time
- Canceling cooking
- MyMiele
- MasterChef
- Favorites
- Alarm + Timer
- General notes
- Steam cooking
- Sous-vide (vacuum) cooking
- Special modes
- Roast probe
- Roast
- Bake
- Broil
- Settings
- Cleaning and care
- Frequently Asked Questions
- Optional accessories
- IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION
- Detailed dimensions of oven front
- Connecting the water intake and drain hoses
- Installation dimensions
- Installation and connection
- Water connection
- Electrical connection
- Caring for the environment
- Technical Service
- MieleCare
- Copyright and licenses
Frequently Asked Questions
162
Problem Possible cause and solution
F 55 The maximum length of time for which the combi
steam oven can be operated on a function has been
exceeded, so the appliance has switched itself off au-
tomatically for safety reasons.
Switch the steam oven off and then back on again.
The steam oven is immediately ready for use again.
F 94 No water intake:
– the water intake hose is trapped or kinked.
Rectify the cause of the problem and start the ap-
pliance again.
– the water supply has been turned off.
Open the water supply stopcock and start the ap-
pliance again.
– one or both float switches in the water container are
stuck.
Release the float switches or switch so that it
moves freely.
If this fault message appears again after the prob-
lem(s) have been corrected, contact Miele Service.
F 190 The water intake valve is faulty.
This can occur if the control panel was opened or
closed during water intake.
Confirm with OK and continue operation.
If the same message appears again, call Miele
Service.