Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Overview
- Control panel
- Description of functions
- Initial commissioning
- Modes / Programs / Menus
- Operation: Steam cooking
- Operation: Combination cooking mode
- Operation: Functions without steam
- Quick guide
- Interrupting operation
- Additional functions
- Setting additional durations
- Turning off automatically
- Turning on and off automatically
- Sequence of an automatic cooking process
- Rapid PreHeat
- Switching off Rapid PreHeat
- Changing the operating mode
- Changing settings during a cooking process
- Changing the temperature
- Changing the core temperature
- Changing the broil level
- Changing the cooking duration
- Deleting a cooking duration
- Deleting a finish time
- Canceling cooking
- MyMiele
- MasterChef
- Favorites
- Alarm + Timer
- General notes
- Steam cooking
- Sous-vide (vacuum) cooking
- Special modes
- Roast probe
- Roast
- Bake
- Broil
- Settings
- Cleaning and care
- Frequently Asked Questions
- Optional accessories
- IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION
- Detailed dimensions of oven front
- Connecting the water intake and drain hoses
- Installation dimensions
- Installation and connection
- Water connection
- Electrical connection
- Caring for the environment
- Technical Service
- MieleCare
- Copyright and licenses
Water connection
182
– A non-return valve is not required.
– The water quality must conform to
the requirements for drinking water in
the country in which the appliance is
being installed.
– The water intake hose must be con-
nected to the drinking water supply
by a faucet with a ³/₄" threaded
union. If this is not present, one must
be installed by a suitably qualified
plumber.
– The faucet must be easily accessible
after the appliance has been in-
stalled.
– Only genuine original Miele hoses
can be used with this appliance.
Connecting the water supply
Danger of electrical shock!
Plumbing connections cannot be
made while the appliance is con-
nected to the electrical supply.
Disconnect the appliance from the
electrical supply.
Connect the stainless steel intake
hose to the water supply.
Ensure that the hose is installed cor-
rectly and that it is watertight.
The connection point is subject to wa-
ter pressure. Turn on the faucet slowly
and check for leaks. Correct the posi-
tion of the washer and union if appro-
priate.