Operating and Installation instructions

Operation: Combination cooking mode
45
Sequence of an automatic cooking
process
Up until the start time the operating
mode, the selected temperature and
moisture level, Start at and the start time
will appear in the display.
After the start time, you can see the
temperature increasing in the display
during the preheating phase until the
set temperature is reached. Once this
temperature is reached a buzzer will
sound.
After the preheating phase you can
follow the time counting down in the
display (time remaining). The last minute
counts down in seconds.
At the end of the cooking process the
steam generator and oven compart-
ment lighting will switch off. A buzzer or
a melody will sound (see "Settings -
Acoustic information").
Steam Reduction (only with temperatures
of approx. 175-210°F / 80-100°C and
100% moisture) and Program Finished
will appear in the display.
You have the option of saving the pro-
gram as a Favorite (see "Favorites").
Touch  to go to the main menu.
Changing settings during a cooking
process
 Select Change.
The following will appear on the display:
– all individual cooking stages
– Add Cooking Stage
The setting specified for a cooking
stage can be changed or more cooking
stages can be added to the program.
 Select the desired cooking stage or
Add Cooking Stage.
 Alter the cooking stages as you wish
(see "Simple operation") and confirm
with OK.
A summary of your settings will appear
on the display.
 Check the settings and confirm with
Accept or select Change to correct the
settings or to add further cooking
stages.
Canceling cooking
 Tap "Back".
Cancel Cooking? appears on the display.
 Select Yes.
The list of operating modes will appear.
Any cooking durations set will be
deleted.
If you tap  again, the main menu will
appear.