Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Overview
- Control panel
- Description of functions
- Before using for the first time
- Modes / Programs / Menus
- Operation: Steam cooking
- Operation: Combination cooking mode
- Operation: Functions without steam
- Quick guide
- Interrupting operation
- Additional functions
- Setting additional durations
- Turning off automatically
- Switching on and off automatically
- Sequence of an automatic cooking process
- Rapid PreHeat
- Switching off Rapid PreHeat
- Changing the operating mode
- Changing settings during a cooking process
- Changing the temperature
- Changing the core temperature
- Changing the broil level
- Changing the cooking duration
- Deleting a cooking duration
- Deleting a finish time
- Canceling cooking
- MasterChef
- Favorites
- Timer
- General notes
- Steam cooking
- Sous-vide (vacuum) cooking
- Special modes
- Roast probe
- Roast
- Bake
- Broil
- Settings
- Cleaning and care
- Frequently asked questions
- Optional accessories
- IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION
- Detailed dimensions of oven front
- Installation dimensions
- Installation
- Electrical connection
- Caring for the environment
- Technical service, data plate, warranty
- MieleCare
IMPORTANT SAFETY INSTRUCTIONS
11
Tampering with electrical connections or components and me-
chanical parts is highly dangerous to the user and can cause opera-
tional faults. Do not open the outer casing of the appliance.
While the appliance is under warranty, repairs should only be per-
formed by a Miele-authorized service technicians. Work by unquali-
fied persons could be dangerous and may void the warranty.
Defective components should be replaced by Miele original parts
only. Only with these parts can the manufacturer guarantee the
safety of the appliance.
If the plug has been removed or the power cord is not supplied
with a plug, the steam oven must be connected to the power supply
by a suitably qualified electrician.
If the power cord is damaged, it must be replaced with a special
connection cable typeH05VV-F (PVC insulated). See "Electrical
connection."
Before installation, maintenance, and repair work, the steam oven
must be disconnected from the electrical supply. It is only com-
pletely isolated from the electrical supply if: the fuse has been re-
moved (where applicable), the main circuit breaker has been tripped,
or the power cord has been unplugged from the wall outlet. Always
be sure to pull the plug not the cord.
If the steam oven is installed behind a cabinet door, do not close
the door while the appliance is in operation. Heat and moisture can
build up behind the closed door and cause damage to the range and
to the surrounding cabinets and flooring. Do not close the door until
the appliance has completely cooled down.
Do not repair or replace any part of the appliance unless specifi-
cally recommended in the manual. All other servicing should be ref-
fered to a qualified technician.