Operating and Installation instructions

Favorites
57
 Check the settings and confirm with
Accept or select Change to correct the
settings or to add further cooking
stages.
 Select Save.
 Enter the program name.
The following symbols appear next to
the alphabet:
Sym-
bol
Description
␣ Space characters
 Alphabet in upper case
 Alphabet in lower case
 Numbers 0 to 9 and hyphen -
 Touch the sensors next to the sym-
bols to highlight the desired charac-
ter.
 Select Select.
The letter or number you have selected
will appear in the top line of the display.
A maximum of 10characters can be
used.
You can delete the characters one at a
time using .
 Finish creating the program name.
 Once you have entered the program
name, select Save.
A message will appear in the display
confirming that the program has been
saved.
 Confirm with OK.
You can start the saved program imme-
diately, delay the start or change the
cooking stages.
More information regarding Change
Cooking Stages can be found in
"Changing Favorites".
Starting a Favorite
 Put the food in the oven.
 Select Favorites.
The display shows the program names
and Edit Program at the bottom.
 Select the desired program.
You can start the saved program imme-
diately, delay the start or change the
cooking stages.
– Start Now
The program will start. The oven
compartment lighting and the steam
generator will switch on immediately.
– Start Later
This option only appears if you are
using the roast probe. You can spec-
ify when you want the program to
start.
– Ready at
You can set the time at which the
cooking program should end.
– Start at
You can set the time at which the
cooking program should start.