36” Puristic Wall Ventilation Hood DA 6698 W Shown: DA 6698 W over KM 3010 Please note: This information is subject to change 8mieleusa.
36” Puristic Wall Ventilation Hood SPECIFICATIONS Canopy Dimensions 353/8” (898mm) W x 33/8” (85mm) H x 1911/16” (500mm) D Unit Height - Vented 28” — 409/16” (710—1030mm) H Unit Height - Recirculating 331/16” — 4511/16” (840—1160mm) H Fan Fan Speeds Maximum CFM 4 625 CFM, (Reducing Collar is available to reduce Air flow to less than 400 CFM) Duct Recommended Duct Diameter 6” (150 mm) Electrical Electrical Requirements 120 V, 60 Hz, 15 Amps Power Cord Molded plug 2.5 ft (0.
6” Puristic Wall Ventilation Hood PRODUCT VIEW PLEASE NOTE: The majority of the weight of the installed ventilation system will be supported by the lower retaining plate. It must be firmly attached to the stud framing behind the drywall. If studs are not available in the required locations, a plywood backing (min. ½” (13 mm) thick) spanning at least two studs must be installed.
36” Puristic Wall Ventilation Hood INSTALLATION SPECIFICATIONS Distance Between Cooktop and Ventilation Hood (S) Page 4 of 4 Specification Sheets TRS 05292018
