Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the ventilation hood
- Description of functions
- Before using for the first time
- Operation (Automatic mode)
- Operation (Manual mode)
- Operation (Automatic and Manual modes)
- Energy-saving tips
- Cleaning and care
- Installation
- Customer Service
- Technical data
Installation
*INSTALLATION*
39
Before installation
Before installation, it is important
to read the information contained in
this chapter and in the “IMPORTANT
SAFETY INSTRUCTIONS” chapter.
Installation parts
4 screws, 7 x 110mm and
4 plugs, 10 x 80mm
for securing the ventilation hood to the
ceiling (not for use in USA / CDN).
The screws and plugs are designed
for use in solid ceilings only.
Use different fasteners for other
ceiling construction types. Make sure
that the ceiling can support the load.
4 extension piece holders
for aligning and securing the telescopic
chimney
4 screws, M4 x 8.5mm
for securing the extension piece
holders.
14 screws, M4 x 8mm
for securing the spacer frame and
securing the hood to the installation
frame.
1 screw, M4 x 16mm
for securing the chimney.
DUI 32 recirculation kit for
recirculation mode
(not supplied, available as an optional
accessory). The kit includes a
directional unit, aluminum hose, and
hose clips.