Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Description of functions
- Guide to the appliance
- Operation (Automatic mode)
- Operation (Manual mode)
- Operation (Automatic and Manual modes)
- Cleaning and care
- Installation
- Exhaust duct
- Electrical connection
- Activating Con@ctivity 2.0
- Service and warranty
- Technical data
Installation
42
A non-return flap is supplied with the
hood
or is already fitted in the exhaust
socket of the motor unit (depending on
model).
With vented mode (AE) insert the
no
n-return flap in the exhaust socket
if your ducting system is not
equipped with one.
Recirculation mode (RM) does not
require the non-return flap to be
inserted. If there is one present, it
should be removed.
Hang the hood on the brackets,
makin
g sure that the controls are at
the front.
Secure the hood with the screws
supplied.