Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Description of functions
- Guide to the appliance
- Operation (Automatic mode)
- Operation (Manual mode)
- Operation (Automatic and Manual modes)
- Cleaning and care
- Installation
- Exhaust duct
- Electrical connection
- Activating Con@ctivity 2.0
- Service and warranty
- Technical data
Installation
36
Use a knif
e to release the four
spacers and the two covers from the
spacer frame supplied.
Use the spacer frame as a drilling
template. Place it on the ceiling with
the arrows pointing forwards. Using
the notches, align the spacer frame
on the intersecting lines and make
pencil marks for the drill holes.
Drill four holes 3/8" (10 mm),
appro
x. 4 1/2" (115 mm) deep for the
plugs supplied.
Place the four plugs in the holes and
screw in the four scr
ews so that they
protrude by approx. 1 3/16" (30 mm).