Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Description of functions
- Guide to the appliance
- Operation (Automatic mode)
- Operation (Manual mode)
- Operation (Automatic and Manual modes)
- Cleaning and care
- Installation
- Exhaust duct
- Electrical connection
- Activating Con@ctivity 2.0
- Service and warranty
- Technical data
Cleaning and care
30
Resetting the filter saturation
counter for the fi
lter
If the filter saturation counter is
activated, it must be r
eset each time
the filter is changed.
To do this, press the filter saturation
indic
ator twice with the fan
turned on and hold it for approx. 3
seconds until 1 is the only indicator
flashing. The OdorFree Charcoal
Filter symbol will go out.
If you replace the OdorFree Charcoal
Filt
er before the full operating time
elapses:
Press the filter saturation indicator
twice and hold it for approx. 6
seconds until 1 is the only indicator
flashing.
Disposing of the OdorFree Charcoal
Filt
er
Used OdorFr
ee Charcoal Filters can
be disposed of with normal
household waste.