Operating and Installation Instructions

Cleaning and care
25
WARNING: TO REDUCE THE RISK
OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
 Before cleaning or servicing the
hoo
d, disconnect it from the power
supply.
Stainless steel housing
General
The surfaces and control buttons are
suscep
tible to scratching and
chipping.
Observe the following cleaning
instructions.
 Clean all surfaces and control
butt
ons using warm water and liquid
dish soap only, applying the mixture
with a sponge cloth.
Make sure that no water gets into
the interior of the hood.
Only use a damp cloth to clean the
hood, especially in the control panel
area.
 After cleaning, dry the surfaces with a
soft cloth.
Avoid the following:
– Cleaners containing soda, acid or
chloride, or cleaners containing
solvents
– Abrasive cleaners such as scouring
powder, scouring
liquid, abrasive
sponges such as pot scourers, or
used sponges that still contain
residues from abrasive cleaners
Special instructions for stainless
steel sur
faces
(does not apply to control buttons)
 Stainless steel surfaces can also be
clea
ned using a non-abrasive
stainless steel cleaner, available from
Miele.
 T
o prevent the surfaces from quickly
becomi
ng dirty again, we
recommend treating them with a
stainless steel care conditioner.
Apply sparingly over the entire area
using a soft cloth.
Special instructions for RAL color
finish housing
(special order)
 Observe the general cleaning
in
structions contained in this chapter.
Minor scratches on the surface are
inevitable when cleaning the housing.
Depending on the lighting in the
kitchen, this may negatively affect the
app
liance's appearance.