Operating and Installation Instructions

Operation (Automatic mode)
18
When Con@ctivity 2.0 is active, the
hood
always operates in Automatic
mode (see "Activating Con@ctivity
2.0").
See "Cooking without Con@ctivity 2.0"
for informa
t
ion on manually operating
the hood.
Cooking with Con@ctivity 2.0
(Aut
omatic mode)
 Turn on a burner to the desired power
setting.
The hood lighting will come on.
After a few seconds, the fan will come
on, briefly operating
at power level 2
before immediately switching to level 1.
The hood selects the fan level
automa
tically during cooking.
This level is determined by the total
output of the cookt
op, i.e. the number
of burners in operation and the power
settings selected.
 If you select a higher power setting
on the
cooktop or switch on multiple
burners, the hood will switch to a
higher fan level.
 If you select a lower power setting on
the cooktop or turn off a burner, the
hood will accordingly switch to a
lower fan level.
Examples for fan levels 1 to
4
Reaction time
Changing the power setting on the
cookt
op does not lead to an immediate
increase or decrease in cooking vapors.
For this reason, the hood reacts with a
slight delay.
Delays can also result from the fact that
the cookt
op transmits the information
to the hood in intervals.
The reaction time can vary from a few
second
s to a couple of minutes.