Technical data

To switch the fan on s
^
Touch the s sensor.
The fan will come on at power level 2.
The s and 2 sensors will light up.
To select a power level
Depending on the intensity of the
cooking vapours, levels 1 to 3 are
usually sufficient for normal cooking.
^
Select the level you require by
touching the 1, 2 or 3 sensors.
Intensive setting
^ For short periods of cooking food
with intensive vapours and a strong
aroma, e.g. when searing meat, you
may wish to select level 4, the
Intensive setting.
Automatic switch-off of the Intensive
setting
You can set the Intensive setting so that
it always only runs for 10 minutes
before reverting automatically to level 3.
^
To set this option, both the fan and
the hob lighting must be switched off.
^
Touch the Run-on option sensor m
for approx. 10 seconds until the 1
sensor lights up.
^
Touch in turn
– the n sensor,
– the 1 sensor, and
– the n sensor again.
If Automatic switch-off is not activated,
the 1 and 4 sensors will flash.
^ Touch the 4 sensor to activate Auto-
matic switch-off.
The 1 and 4 sensors will now light up
constantly.
Touch the 1 sensor to deactivate the
Automatic switch-off function.
^
Confirm your selection by touching
the m sensor.
–
If you do not confirm within 4
minutes, the cooker hood will
automatically revert to the original
setting.
Operation
14