Technical data

Installation
46
 Remove the grease filters from the
cooker hood.
 Remove the safety screw for the
tower on the inside of the frame.
 Push the tower and the telescopic
piece upwards and bend the
retaining tabs outwards again to
prevent the tower and telescopic
piece from slipping down again.
 Fit the four telescopic piece clamps
between the tower and the telescopic
piece. The internal telescopic piece
rests on the clamps. When the
screws are tightened, the clamps
spread out and push the telescopic
piece upwards.
Tighten the screws only until the top
edge of the telescopic piece is
evenly aligned with the ceiling or the
spacer frame.