Technical data
Table Of Contents
Installation
25
a
3 protective sheets
for use when fitting the tower
b
1 exhaust connection
for exhaust ducting 150 mm
c
1 reducing collar
for exhaust ducting 125 mm
d
1 non-return flap
for installation in the exhaust socket
of the fan motor (not for recirculation
mode). The non-return flap may
already be fitted depending on
model.
e
Wall bracket
for securing the cooker hood to the
wall
f
Conversion kit for recirculation
mode
including directional unit and flexible
aluminium hose (the conversion kit
is not supplied. It is available as an
optional e
xtra - see "Technical
data").
8 screws, 5 x 60 mm and
8 plugs, 8 x 50 mm
for securing to the wall.
The screws and plugs are designed
for use in
solid walls only.
For other types of wall construction,
alt
ernative fixings will be required.
Make sure the wall is able to take the
weig
ht of the cooker hood.
2 x M 6 self-tapping nuts
for securing the canopy
2 screws 3.9 x 7.5 mm
for securing the tower
1 lever
for dismantling the tower
Montage
Installation
Montaje
Montaggio
Montering
Montagem
Asennus
Installation instructions