Technical data

Installation
40
 P
ull the grease filters out of the slots
in the front of the cooker hood hous‐
ing.
The spacer strip needs to be attached
t
o the back of the cooker hood housing
before the cooker hood is installed in
the wall unit. The spacer strip can be
attached to the upper  or lower edge
 of the deflector plate.
 C
alculate the measurement T for the
spacer strip
 Cut the spacer strip t
o measurement
T. Score along the groove for the
smaller measurement as shown, and
remove the surplus.
 Scr
ew the spacer strip to the back of
the cooker hood at the required posi‐
tion. Use the screws supplied. To at‐
tach the spacer strip to the lower
edge  use the screws previously re‐
moved from the housing unit.