Technical data

Installation
35
Installation recommendations
– To achieve optimum vapour extrac‐
tion
, the cooker hood must cover the
hob. It should be positioned centrally
over the hob, not to the side of it.
– The hob should be no wider than the
coo
ker hood, and if possible, it
should be narrower.
– The installation area must be easily
acce
ssible. The cooker hood should
be easily accessible and easy to dis‐
mantle in the event that service is re‐
quired. This should be taken into
consideration when planning the po‐
sition of cupboards, shelves, ceilings
or features in the vicinity of the cook‐
er hood.
Before installation
 Befor
e installation, it is important
to read the information given on the
following pages as well as the
"Warning and Safety instructions" at
the beginning of this booklet.