Technical data

Cleaning and care
30
Resetting the grease filter operating
hou
rs counter
After cleaning, the operating hours
coun
ter needs to be re-set.
 Whilst the fan is switched on, pr
ess
the operating hours control  for
approx. 3 seconds, until only the 1 is
flashing.
The grease filter symbol  goes out.
If you want to clean the grease filter(s)
befor
e the operating hours counter has
reached its maximum,
 P
ress the operating hours control
 for approx. 6 seconds, until only
the 1 is flashing.
Charcoal filters
With recirculation mode, two charcoal
filt
ers must be fitted in addition to the
grease filters. These are designed to
absorb cooking odours.
Charcoal filters can be obtained from
your Miele dealer or via the internet at
www.miele-shop.com. See end of this
booklet for contact details, and "Tech‐
nical data" for type and reference num‐
ber.
Fitting/replacing charcoal filters
The slots for the charcoal filters are lo‐
cat
ed above above the grease filters.
 Remo
ve the cover. It is held in place
by magnets.
 T
ake the charcoal filters out of their
packaging.
 Inser
t the charcoal filters in the slots.
 Replace
the cover.
 When fitting for the first time, activate
the operating hours counter (see
"Operation").