Technical data

Operation (Automatic mode)
18
When Con@ctivity 2.0 is activated, the
coo
ker hood always works in automatic
mode (see "Activating Con@ctivity
2.0").
To operate the cooker hood manually,
see "Cooking without Con@ctivity 2.0".
Cooking with Con@ctivity 2.0
(Au
tomatic mode)
 Switch a cooking zone on at the
power level you want.
The cooker hood lighting will come on.
 P
ull out the deflector plate.
The fan will come on at power level 2.
The cooker hood selects the power lev‐
el aut
omatically during cooking.
This is determined by the total output of
the hob, i.e, the number of cooking
zones in
operation and the power levels
selected.
 If you select a higher power level or
are using several cooking zones, the
cooker hood will switch to a higher
power level.
 When you
reduce the power level or
the number of cooking zones on the
hob, the cooker hood power level is
also reduced.
Examples for power levels 1 t
o 4
Reaction time
The cooker hood reacts with a slight
delay because al
tering the power level
on the hob does not immediately result
in a reduction or increase in cooking
vapours.
Because the hob transmits the informa‐
tion t
o the cooker hood at intervals, this
can also cause delays.
The reaction can vary from a few sec‐
onds t
o a couple of minutes.