Technical data

Signing on/off the remote control
43
If the connection has been lost between
the r
emote control and the cooker
hood, they must be signed on again. To
do this, the remote control function on
the cooker hood and the remote control
must be signed off first of all.
Signing on and off must be done at the
same time on
the cooker hood and the
remote control. Signing on/off mode
has to be accessed on the cooker hood
first, then on the remote control.
To access Signing on/off mode on
the cook
er hood
 P
ress the run-on option control
515 for approx. 10 seconds until
the indicator for power level 1 lights
up.
 The
n press in turn,
– the "" contr
ol,
– then the "" control,
– then the lighting control .
 Then access the Signing on/off mode
on the
remote control immediately.
To access Signing on/off mode on
the remote control
 P
ress both arrow controls  at the
same time and hold for about 5
seconds until the remote control LED
flashes.
 P
ress the lighting control .
To sign off
 In Signi
ng on/off mode press the ""
control on the cooker hood and then
on the remote control.
The remote control LED will flash
st
eadily.
After approx. 10 seconds the remote
contr
ol LED will flash on and off twice
with a longer interval between the
flashes. The remote control has now
been signed off. The LED will go out
after a short while.