Technical data

Activating Con@ctivity 2.0
41
Installing the Con@ctivity 2.0
S
tick
In order to use the Con@ctivity 2.0
fun
ction, the hob must first be fitted
with the Con@ctivity 2.0 Stick.
 Ple
ase read the separate installation
instructions supplied with the
Con@ctivity 2.0 Stick.
Activating Con@ctivity 2.0
Wireless connection must be activated
between the
hob and the cooker hood
before the Con@ctivity 2.0 function can
be used.
Both appliances must be installed and
oper
ational.
Wireless connection must be activated
on the co
oker hood and the hob at the
same time. Activation on the cooker
hood is described below.
Activation on the hob is described in
the relevant Operating and installation
instructions. Please refer to the
Operating instructions before starting.
Activate the cooker hood first, then the
hob.
Activating the cooker hood
This is only possible via the cooker
hoo
d control panel, not via the
remote control.
 The
hob and cooker hood must be
switched off.
 Press the run-on option control
515 for approx. 10 seconds until
the indicator for power level 1 lights
up.
 The
n press in turn,
– the "" contr
ol,
– then the "" contr
ol,
– then the lighting control .
If the remote control is already
activat
ed, 2 and 3 will light up
constantly. If there is no wireless
connection 2 and 3 will flash at the
same time.
 T
o activate Con@ctivity 2.0, press the
"" control.
The search for a signal will start.
 Mean
while, start activating the hob.