Technical data

Cleaning and care
31
Resetting the grease filter operating
hou
rs counter
After cleaning, the operating hours
coun
ter needs to be re-set.
 Whilst the fan is switched on, pr
ess
the operating hours control  for
approx. 3 seconds, until only the 1 is
flashing.
The grease filter symbol  goes out.
If you want to clean the grease filter(s)
befor
e the operating hours counter has
reached its maximum,
 P
ress the operating hours control
 for approx. 6 seconds, until only
the 1 is flashing.
Charcoal filters
With recirculation mode, two charcoal
filt
ers must be fitted in addition to the
grease filters. These are designed to
absorb cooking odours.
The charcoal filters are inserted in the
separate recirculation unit.
 When fitting
for the first time, activate
the operating hours counter (see
"Operation").
When to change the charcoal filters
 Always replace the charcoal filters
when they no longer absorb kitchen
odours effectively.
They should, however be replaced at
least every 6 months.
The charcoal filter operating hours
symbol  will ligh
t up to remind you to
change the charcoal filters.
 The
charcoal filter operating hours
counter needs to be activated before
using for the first time (see
"Operation").
Resetting the charcoal filter
oper
ating hours counter
After changing the charcoal filters, the
operating hours counter needs to be re-
set.
 T
o do this, with the fan switched on,
press the operating hours control
 once, then press it again and
hold it for approx. 3 seconds until
only the 1 is flashing. The Charcoal
filter symbol  will go out.
If you want to replace the charcoal
filt
ers before the operating hours
counter has reached its maximum:
 P
ress the operating hours control
 twice and hold it for approx. 6
seconds until only the 1 is flashing.
Disposing of the charcoal filters
 Used char
coal filters can be disposed
of with the normal household waste.