Technical data

Cleaning and care
29
Removing the panels and grease
filt
ers
The panels and the grease filters need
t
o be removed for cleaning. During
cooking, condensation forms on the
panels which evaporates after cooking.
To avoid this dripping on you, do not
remove the panels for approximately
two hours after cooking has finished.
The panels and grease filters can fall
ou
t when you are handling them.
This can result in damage.
Make sure you hold the panels and
gr
ease filters securely at all times
when handling them.
 T
o remove a panel, hold it at the
sides, as shown. Pull it downwards
out of the front locking clip, unhook it
at the back and remove it.
 T
o take out a grease filter, release the
locking clip on the filter, lower the
filter slightly, unhook it at the back
and remove it.
Cleaning the panels by hand
 F
ollow the instructions under
"Housing".
Cleaning the grease filters by hand
 Cle
an the filters with a soft nylon
brush in a mild solution of hot water
and a small amount of washing-up
liquid. Do not use "neat" washing up
liquid.
Unsuitable cleaning agents
Unsuitable cleaning agents can cause
damage t
o the surface of the filters if
used regularly.
Do not use:
– cleaning agents containing descaling
agents
– powder cleaners, cream cleaners
– aggressive multi-purpose cleaning
agents or spray cleaners for grease
– oven sprays