46” Extra-Slim Insert Hood DA 2628 Stainless Steel Shown: DA 2628 in Stainless Steel Please note: This information is subject to change 8mieleusa.
46” Extra-Slim Insert Hood SPECIFICATIONS Overall Unit Dimensions 467/16” (1180 mm) W x 131/2” (342 mm) H x 111/2” (293 mm) D Built-In Minimum Opening Dimensions 457/8” (1165 mm) W x 125/8” (320 mm) H x 107/8” (276 mm) D Fan Fan Speeds Maximum CFM 4 625 CFM, (Reducing Collar is available to reduce Air flow to less than 400 CFM) Duct Recommended Duct Diameter 6” (150 mm) Electrical Electrical Requirements Power Cord 120V, 60Hz,15A Molded NEMA 5-15 plug, 2.5 ft (0.
46” Extra-Slim Insert Hood INSTALLATION SPECIFICATIONS Product Details Niche/Cutout Details Page 3 of 5
6” Extra-Slim Insert Hood INSTALLATION SPECIFICATIONS Distance Between Cooktop and Ventilation Hood (S) Page 4 of 5
46” Extra-Slim Insert Hood R2000 (optional accessory) If you would like to reduce the enviromental impact of your ventilation system by limiting the CFM output the Reducing Collar can be installed. It reduces the air flow to less than 400 CFM. Check local building codes for maximum CFM requirements.
