Operating instructions/Installation instructions

Cleaning and care
32
After cleaning
 After cleaning, leave the filters to dry
on an absorbent surface before repla-
cing them.
 When removing the filters for clean-
ing, also clean off any residues of oil
or fat from the now accessible hous-
ing to prevent the risk of these catch-
ing fire.
 Refit the grease filters and close the
locking catches.
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be reset.
 Whilst the fan is switched on, press
the operating hours control for
approx. 3seconds, until only 1 is
flashing.
The grease filter symbol goes out.
If you want to clean the grease filters
before the operating hours counter has
reached its maximum:
 Press the operating hours con-
trol for approx. 6seconds, until
only 1 is flashing.